SENSOR MAGNET
JOINED IN A SLEEVE

01Innovative technology for efficient production

Permanent magnets are used in many sensor applications as signal transmitters for Hall sensors and/or magnetoresistive sensors. The magnetic fields are relatively low, so external magnetic interference fields could lead to incorrect measurement results. In such cases, magnetic shielding is beneficial.

WHAT IS OUR SOLUTION IN THIS CASE?

In this case, magnetic shielding helps. For example by joining the sensor magnet in a sleeve. By "joined in a sleeve", we mean the production process of a cost-efficient production since the entire assembly can be manufactured in a single step.

Back

WHICH TYPE OF MAGNETIC MATERIAL DO WE USE?

We use a plastic-bonded, pressed neodymium iron boron ring magnet. We can achieve minimum wall thicknesses of 1.5 mm. Narrow tolerances and precise magnetisations, for example multi-pole magnetisation at the inside diameter, are possible.

Back

Technical data

  • Material designation NdFeB 72 / 70 pw | 65 / 70 pw | 65 / 85 pw
  • Isotropic
  • Typical remanence of 700 mT
  • Multi-pole magnetisation possible at the inside diameter
  • Binding agent approx. 2 % epoxy

Back

02Advantages / Benefits

Magnetic shielding

No adhesive bonds

Low use of magnetic material since wall thicknesses of up to 1.5 mm can be implemented

Tight tolerances

no adhesive gaps and therefore less imbalance

Magnetic alloy without dysprosium

Precise magnetisation

efficient production

can be produced in a single step

Compact installation space due to the use of highly remanent magnetic material

Speeds of more than 50,000 rpm are possible (burst protection)

Design according to customer requirements

03WHAT ARE TYPICAL APPLICATIONS?

Typical applications of magnetic field sensors include the contact-free detection of position, rotation and speed. Shielding is especially important in the e-mobility sector because of the interference fields that are prevalent there, for example in electro-hydraulic brake systems.

Depending on the version, the rotor position of a motor is transferred to the sensor element via the sensor magnet. With the help of the electrical system, the signals for functions such as the anti-lock braking system, tracking control system, electronic brake force distribution, adaptive cruise control or hill start assist and hill descent control can be made available.

In addition to electro-hydraulic brake systems, these types of sensor magnets are also used in many other safety-related applications or extras that increase the driving comfort. However, they are especially used where shielding is required to prevent opposing fields for safety reasons in order to prevent accidents and protect pedestrians, for example with electronic steering (including rear-axle steering), automatic gear selection or seatbelts.

In terms of the extras, these applications include seat adjustments, power windows or electric sunroofs, electric trunk lids or ventilation flaps for a pleasant interior temperature. Sensor applications are also used for engine management and exhaust gas recirculation (EGR).

 

MAGNETS IN VEHICLES

APPLICATIONS WITH MAGNET SENSORS

04Contact form

You have questions about our products, would like information on our services or want to make a suggestion?

Then please get in touch with us!
Just complete the form and submit it.

MSS :: Contact Form

Right-Col
Left-Col
full-width-col

* Mandatory information
PRIVACY NOTICE
We want to provide you custom information and advice. We will treat your information confidentially and handle it with care.

05Your Contactperson

PLEASE DO NOT HESITATE

to call me or send me an e-mail.
I look forward to your message.

Heinz Schell

Key Account Manager

+49 7422/519-1504

06Competencies

Because our areas of expertise are interlinked

With our unique linked chain of areas of expertise, we can act as a specialist and as an all-rounder, depending on what is required, as a one-stop shop for high-quality processes. Together, we can transform a good idea into a genuine com-petitive advantage. After all, for you, the perfect amalgam of experience, expertise and technical implementation means, above all, one thing – efficiency. This creates results that firmly embed success in your products.  

MS-Schramberg has stood for solution expertise and quality for more than half a century. We are one of Europe’s leading manufacturers of permanent magnets and assemblies. With around 600 employees, we develop and produce customer-specific articles in three plants in the Black Forest, which are used successfully by companies from a wide range of industries worldwide.

THE POWER OF THE WHOLE

The requirements expected of permanent magnets and magnet assemblies are becoming ever more individual and, at the same time, ever more complex. We therefore take pleasure in casting light on the entire value-added chain: We are there beside you as a dependable partner, all the way from shared product development to on-schedule delivery.